Hi ! im having problems.. my engine crack but never starts... its was working, the last thing I did was raise the pressure of fuel, changing req_fuel accord the new injectors flow... The engine start, it goes off and nothing more..
I test the coil, i have spark!, idk what can be..
Thanks everyone.
MS2 Crank but never starts
Moderators: jsmcortina, muythaibxr
MS2 Crank but never starts
- Attachments
-
- msq.12.msq
- (90.54 KiB) Downloaded 23 times
-
- no arranca.msl
- (92.9 KiB) Downloaded 23 times
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: MS2 Crank but never starts
First - how accurate are the temperature readings? They look a bit warm for wintertime, but plausible if you're in a garage or in the tropics.
Does your ignition timing look correct while cranking?
Any reason you're using 3.2.4 firmware? Consider upgrading to the latest, 3.4.2, while you're just getting started. Less to re-tune later.
Does your ignition timing look correct while cranking?
Any reason you're using 3.2.4 firmware? Consider upgrading to the latest, 3.4.2, while you're just getting started. Less to re-tune later.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: MS2 Crank but never starts
I'm from Argentina so here is summer!, Well, i Will update to the lastest fw, there is a posibility of get a bug when i change the injectors flow? Thanks !!Matt Cramer wrote:First - how accurate are the temperature readings? They look a bit warm for wintertime, but plausible if you're in a garage or in the tropics.
Does your ignition timing look correct while cranking?
Any reason you're using 3.2.4 firmware? Consider upgrading to the latest, 3.4.2, while you're just getting started. Less to re-tune later.
Enviado desde mi MotoE2(4G-LTE) mediante Tapatalk
Re: MS2 Crank but never starts
Was looking at your datalog and PW of the injectors is in seconds and not in msec
Maybe something wrong in the req fuel calculation ??
Maybe something wrong in the req fuel calculation ??