What version of firmware are the latest MS2 boards ( 3.0 and 3.57 ) shipping with. 3.4.2 or 3.4.3?
I've encountered some issues with 3.4.3 ( Serial Signature comms 342c2 ) and the VE Table generator producing wildly different values than 3.42 ( Serial signature 3.42a2 ) with all of the same parameters inputted.
I'm beginning to wonder is the serial signature for 3.43 firmware is correct? ( 342c2 )
Current Firmware on new boards.
Moderators: jsmcortina, muythaibxr
-
BlackBird_SR71
- Experienced MS/Extra'er
- Posts: 354
- Joined: Tue Mar 22, 2016 2:26 pm
Re: Current Firmware on new boards.
New boards if they had firmware installed should be the current recommended firmware 3.4.2
3.4.3 is a beta firmware and not suitable for retail distribution.
I believe 3.4.3 was created in an effort to fix a certain issue, I don't recall if it was successful or should be used.
3.4.3 is a beta firmware and not suitable for retail distribution.
I believe 3.4.3 was created in an effort to fix a certain issue, I don't recall if it was successful or should be used.
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
-
jsmcortina
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Current Firmware on new boards.
The VE table generator is a TunerStudio feature. The firmware version should have no effect on it whatsoever. Best to post about it in the TunerStudio sub-forum.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
Six_Shooter
- Super MS/Extra'er
- Posts: 1424
- Joined: Mon Oct 17, 2011 7:28 pm
- Location: South Western Ontario
Re: Current Firmware on new boards.
There's a 3.4.3 firmware? I though MS2 development was basically done, with efforts being spent on MS3?
Tha Toy: 1973 Datsun 240Z Turbocharged, and loads of fun, now MS'd
Tha Otha Toy: 1923 T-bucket Hot Rod, Currently Sniper'd
Tha Daily: 2005 Chevy Blazer
Tha Summer Daily: 1987 Buick Skyhawk hatchback
Tha Long Term Project: 1985 GMC S-10 Jimmy, hasn't been fun for a while
Tha Otha Toy: 1923 T-bucket Hot Rod, Currently Sniper'd
Tha Daily: 2005 Chevy Blazer
Tha Summer Daily: 1987 Buick Skyhawk hatchback
Tha Long Term Project: 1985 GMC S-10 Jimmy, hasn't been fun for a while
-
racingmini_mtl
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Current Firmware on new boards.
That's not a new development release but a maintenance release. The MS2/Extra code is still maintained so if bugs are found they will be corrected (as time and resources permit).Six_Shooter wrote:There's a 3.4.3 firmware? I though MS2 development was basically done, with efforts being spent on MS3?
Jean
