Hello all, I'm in the process of building an engine for my '88 Camaro, and I'm ripping out the stock ECM and replacing it with a MicroSquirt. I've done a few remote starts in the past so I'm fairly familiar with wiring, and so I've just finished charting out all the connections I need to make to the ECM harness once I tear out the stock ECM. I've been following all of the guides from the MicroSquirt and MSExtra websites and I think I have everything ready to go. However from past experience I feel the need for a second set of eyes before I go ahead with the stripping and soldering.
Here is my ECM to MicroSquirt Chart:
Please let me know if what I'm planning is wired correctly. Don't hesitate to ask me questions about my setup because your suggestions are backed by more experience than I have.
'88 Camaro μS Project Approval
Moderators: jsmcortina, muythaibxr