I need help micro on a mazda fs-de motor

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
coliveras
MS/Extra Newbie
Posts: 2
Joined: Sat Feb 17, 2018 9:21 pm

I need help micro on a mazda fs-de motor

Post by coliveras »

hello everyone im new to this.
i need help with a 2002 Mazda protege5 fs-de. i got the coil pack from a 2002 626 with the quad spark, but i dont have spark on the ignition setup spark mode i have as edis.
Everything is connected right. i need help starting it or if someone has a base map i could use.
rickb794
Super MS/Extra'er
Posts: 6155
Joined: Sun Dec 21, 2008 10:28 am
Location: Portland OR

Re: I need help micro on a mazda fs-de motor

Post by rickb794 »

Do you get an rpm indication in Tuner Studio?
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
coliveras
MS/Extra Newbie
Posts: 2
Joined: Sat Feb 17, 2018 9:21 pm

Re: I need help micro on a mazda fs-de motor

Post by coliveras »

rickb794 wrote:Do you get an rpm indication in Tuner Studio?
Hi rickb794,
The rpm move when I crank it over. But the tach wire is not connected could that be the problem.
Plus is my first to.e trying to tune a car. Any advice could help.
And thank you
Post Reply