Stim with VR sensor

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
wes kiser
Super MS/Extra'er
Posts: 1402
Joined: Tue Jan 03, 2006 2:49 pm
Location: Charlotte, NC

Stim with VR sensor

Post by wes kiser »

I have always had a hal igniton input. I will be helping my old universites FSAE team, and i think they are using a VR sensor. Does the stim also work with a squirt configured for VR? Thanks.
86 Rx-7, swapped to 2.3 ford turbo (BW EFR 6758), ms3/ms3x sequential fuel /waste spark, ls2 coils
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
Top
jsmcortina
Site Admin
Posts: 39619
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Post by jsmcortina »

Depends on the stim.... however with mine it does. If not you can try adding a capacitor in series - this allowed me to trigger an EDIS module on the bench.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
Post Reply

Return to “MegaStim”