stim

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
dieselman
MS/Extra Newbie
Posts: 23
Joined: Sun Apr 01, 2007 10:12 am

stim

Post by dieselman »

i was wondering if the pots on the stim move together i mean when i turn tps nothing happens untill i turn ait and clt arnt they supposed to be separate from each other could i have a solder bridge on v3 board or just the stim
Top
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Post by Matt Cramer »

They are not supposed to work together, although Megasquirt sometimes ignores a few of its inputs until it gets an RPM signal.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Top
Post Reply

Return to “MegaStim”