RPM without plugging stim in
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
RPM without plugging stim in
What all is required to be plugged in to the stimulator to get an active RPM signal? I plugged in power to the stimulator, but I wasn't able to get a square wave to show up on the oscope. If it is required to be plugged into the MS to stimulate a RPM signal, what could be done to the board that will allow me to do so otherwise?
1997 Turbo Saturn
MS3 v0.22
TunerStudio v[insert_current_version_here]
MS3 v0.22
TunerStudio v[insert_current_version_here]
Re: RPM without plugging stim in
The Stim need to be plugged into the MS before it's able to give any output.
(4G63T - MSIIextra) (4G13 - MS3-beta testing)