As above, but the injector/warmup/AE LEDs on the case still do their thing. The fuel pump stim LED works fine, as do all the pots...but those two little injector buggers stopped working. They did work last night, during testing, and then they just stopped. If the one on the case works, maybe they're just burned out?
Thoughts?
My injector LEDs have stopped.
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 88
- Joined: Sun Dec 10, 2006 5:05 pm
My injector LEDs have stopped.
1984 Volvo 244
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: My injector LEDs have stopped.
If this is stim testing, where is the TPS pot? Perhaps you are in flood-clear mode?
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 88
- Joined: Sun Dec 10, 2006 5:05 pm
Re: My injector LEDs have stopped.
I did a quick test, but it acts the same way in or out of flood clear. My 9v battery is only reading 6v through MT...would that cause it? I'm not worried, the unit was a working one that I got in a trade for some rims, I've just never played with a stim before so I have been testing it out .
1984 Volvo 244
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: My injector LEDs have stopped.
You may just need a new battery - the Megasquirt drains 9Vs pretty quickly.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Helpful MS/Extra'er
- Posts: 88
- Joined: Sun Dec 10, 2006 5:05 pm
Re: My injector LEDs have stopped.
Well...popped the lid on the box tonight after the USB converter stopped working too.
Lets just say...always check to make sure the socketed chip is solidly connected to the socket.
Works great now .
Any ideas how I can keep this from happening again?
Lets just say...always check to make sure the socketed chip is solidly connected to the socket.
Works great now .
Any ideas how I can keep this from happening again?
1984 Volvo 244
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
-
- Helpful MS/Extra'er
- Posts: 88
- Joined: Sun Dec 10, 2006 5:05 pm
Re: My injector LEDs have stopped.
NM...the builder of the unit (two owners ago) never pushed the chip all the way into the socket.
I wonder if that's why I have it now...too many issues and frustration for the previous owners.
Works for me .
I wonder if that's why I have it now...too many issues and frustration for the previous owners.
Works for me .
1984 Volvo 244
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter
MS2 v3.57
B6304S swap w/AW30-40e transmission.
Transmission controller made from a BASIC stamp & arcade joystick shifter