Apologies if this is in the wrong board or it's been posted before.
I've found a 12v adapter from something else (external HDD) that seems to fit the bill for powering the Stim, it's 12v, correct size jack, correct terminal orientation.... except that it has current rated at 2A.
Is this too definitely going to be too much to power the Stim and board? If so, anyone in the UK found a cheap, suitable adapter from somewhere like ebay?
JimStim Power Supply
Moderators: jsmcortina, muythaibxr
JimStim Power Supply
Triumph Spitfire 1500 - MS3 + MSX running sequential injection with direct coil control.
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: JimStim Power Supply
So long as the polarity is correct and it isn't putting out more that 18V when off-load that go ahead.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: JimStim Power Supply
Thanks James
Triumph Spitfire 1500 - MS3 + MSX running sequential injection with direct coil control.