Hi.
Does anyone have either a jimstim for sale or available for use in or around the Reading area.
I am having a few problems getting my car going and have been advised to try this to simulate a running engine. I don't have one and am fairly short on time.
If anyone can help it would be most appriciated.
Thanks, Jonathon
Jimstim wanted
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Jimstim wanted
Reading, UK?
I've a kit here in Birmingham. I'll send you a PM.
JAmes
I've a kit here in Birmingham. I'll send you a PM.
JAmes
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Jimstim wanted
Hi all,
First of all big thanks to jsmcortina for supplying the jimstim kit, arrived really quickly and was easy to assemble in abot 2 hours.
Went through all the test procedure on the jimstim and it is all working properly so I plugged it into the ECU.
Will post up the results of the simulation in my other thread.
Thanks again
First of all big thanks to jsmcortina for supplying the jimstim kit, arrived really quickly and was easy to assemble in abot 2 hours.
Went through all the test procedure on the jimstim and it is all working properly so I plugged it into the ECU.
Will post up the results of the simulation in my other thread.
Thanks again