Does 60-2 wheel provide a cam signal or not

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Does 60-2 wheel provide a cam signal or not

Postby bertjeconti » Thu Jan 23, 2014 12:25 am

I'm using the Jimstim 2.03 controller.

The table (for dipswitch settings) says no cam signal available for the 60-2 wheel pattern, but when i studied the wheel pattern .txt file, it shows that there is a cam signal in this wheel pattern.
I,m confused now, is there a cam signal or not?

I wat to use the cam signal for triggering my scope.
bertjeconti
MS/Extra Newbie
 
Posts: 17
Joined: Tue Nov 26, 2013 3:46 pm

Re: Does 60-2 wheel provide a cam signal or not

Postby dontz125 » Thu Jan 23, 2014 8:24 am

? The wheel selection table I'm looking at shows a '2ndtach signal' for the 60-2 pattern.
dontz125
Super MS/Extra'er
 
Posts: 3539
Joined: Mon May 11, 2009 7:14 pm
Location: Scarborough, ON

Re: Does 60-2 wheel provide a cam signal or not

Postby racingmini_mtl » Thu Jan 23, 2014 9:56 am

The 'X' in the table indicates that the cam signal is present.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
racingmini_mtl
Super MS/Extra'er
 
Posts: 8012
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada

Re: Does 60-2 wheel provide a cam signal or not

Postby bertjeconti » Thu Jan 23, 2014 11:08 am

Nice

Thanks for the quick answers

(Stupid from me, was thinking "X" ment no cam signal)
bertjeconti
MS/Extra Newbie
 
Posts: 17
Joined: Tue Nov 26, 2013 3:46 pm


Return to MegaStim

Who is online

Users browsing this forum: No registered users and 2 guests