Does 60-2 wheel provide a cam signal or not

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
bertjeconti
MS/Extra Newbie
Posts: 18
Joined: Tue Nov 26, 2013 3:46 pm

Does 60-2 wheel provide a cam signal or not

Post by bertjeconti »

I'm using the Jimstim 2.03 controller.

The table (for dipswitch settings) says no cam signal available for the 60-2 wheel pattern, but when i studied the wheel pattern .txt file, it shows that there is a cam signal in this wheel pattern.
I,m confused now, is there a cam signal or not?

I wat to use the cam signal for triggering my scope.
dontz125
Super MS/Extra'er
Posts: 4200
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Does 60-2 wheel provide a cam signal or not

Post by dontz125 »

? The wheel selection table I'm looking at shows a '2ndtach signal' for the 60-2 pattern.
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: Does 60-2 wheel provide a cam signal or not

Post by racingmini_mtl »

The 'X' in the table indicates that the cam signal is present.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
bertjeconti
MS/Extra Newbie
Posts: 18
Joined: Tue Nov 26, 2013 3:46 pm

Re: Does 60-2 wheel provide a cam signal or not

Post by bertjeconti »

Nice

Thanks for the quick answers

(Stupid from me, was thinking "X" ment no cam signal)
Post Reply