jimstim w/ ms3 no comm

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

jimstim w/ ms3 no comm

Postby xrattiracer » Sat Mar 15, 2014 1:32 pm

Have a jimstim 1.5 hooked to MS3 w/ MS3X but the MS does not appear to be powering up properly.
the jimstim passed all tests during assembly and is being powered by a 9V wall wart (measuring ~11V at pin 28). FP LED lights up at about half intensity while plugged into the MS, and
The MS functions correctly when plugged into the harness in the car.
Have checked everything i can think of and am out of ideas.
Experienced MS/Extra'er
Posts: 300
Joined: Fri Aug 01, 2008 2:25 pm

Return to MegaStim

Who is online

Users browsing this forum: No registered users and 1 guest