jimstim w/ ms3 no comm

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
xrattiracer
Experienced MS/Extra'er
Posts: 301
Joined: Fri Aug 01, 2008 2:25 pm

jimstim w/ ms3 no comm

Post by xrattiracer »

Have a jimstim 1.5 hooked to MS3 w/ MS3X but the MS does not appear to be powering up properly.
the jimstim passed all tests during assembly and is being powered by a 9V wall wart (measuring ~11V at pin 28). FP LED lights up at about half intensity while plugged into the MS, and
The MS functions correctly when plugged into the harness in the car.
Have checked everything i can think of and am out of ideas.
Post Reply