Have a jimstim 1.5 hooked to MS3 w/ MS3X but the MS does not appear to be powering up properly.
the jimstim passed all tests during assembly and is being powered by a 9V wall wart (measuring ~11V at pin 28). FP LED lights up at about half intensity while plugged into the MS, and
The MS functions correctly when plugged into the harness in the car.
Have checked everything i can think of and am out of ideas.
jimstim w/ ms3 no comm
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 301
- Joined: Fri Aug 01, 2008 2:25 pm