STIMX inj/spk outputs

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
87lsx10
MS/Extra Newbie
Posts: 25
Joined: Mon Apr 21, 2014 4:55 pm

STIMX inj/spk outputs

Post by 87lsx10 »

Why does changing the ignition order not change the order on the stimx board. New to this and basic theory I would think you could see it change.
slow_hemi6
Super MS/Extra'er
Posts: 4122
Joined: Fri May 07, 2004 3:33 am
Location: Australia

Re: STIMX inj/spk outputs

Post by slow_hemi6 »

No the outputs do not change. They always cycle in the order A through to what ever, up to H. You must wire the outputs so that the sequence matches the correct order.
http://www.msextra.com/doc/ms3/hardware ... iring-ms3x
Find the Manuals up top under Quick links: Manuals. :RTFM:
Cheers Luke
Post Reply