JimStim 2.0.4 wheel pattern upgrade issue

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Post Reply
ebinkerd
MS/Extra Newbie
Posts: 2
Joined: Sat Apr 18, 2015 8:17 pm

JimStim 2.0.4 wheel pattern upgrade issue

Post by ebinkerd »

It seems that with firmware 2.0.4 I am getting a signature mismatch error when trying to run the wheel pattern exe. Can someone shed some light on this issue? I believe ( and I may be wrong) a single line of code needs to be added to the source code. And advice or help is much appreciated.
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: JimStim 2.0.4 wheel pattern upgrade issue

Post by racingmini_mtl »

The exe and source code on the web site have been updated to correct this.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
Post Reply