Knock sensor test whit Megastim?

Building and using the Stimulator to test your Megasquirt

Moderators: jsmcortina, muythaibxr

Knock sensor test whit Megastim?

Postby Rotxam » Sat Jan 23, 2016 9:01 pm

Hello,

Can i try the knock sensor by plugging it in the P3 spare pin of de megastim. One wire to pin 5 and other at sensor ground ? Ground sensor dont have available pin.

I try the knock sensor directly on DB37 pin 5 and 7 for ground. But its not working.

I have the internal knock module instal on MS3 card.

Sorry for my english.
Rotxam
MS/Extra Newbie
 
Posts: 21
Joined: Fri Jul 10, 2015 9:02 pm

Re: Knock sensor test whit Megastim?

Postby Matt Cramer » Mon Jan 25, 2016 8:22 am

The MS3 knock module needs a frequency based input. The Stim does not have a good way of generating a test signal for it.
Matt Cramer
Super MS/Extra'er
 
Posts: 13736
Joined: Thu Apr 16, 2009 8:08 pm

Re: Knock sensor test whit Megastim?

Postby Rotxam » Mon Jan 25, 2016 1:05 pm

With a hammer for generating a signal ?

Thanks
Rotxam
MS/Extra Newbie
 
Posts: 21
Joined: Fri Jul 10, 2015 9:02 pm


Return to MegaStim

Who is online

Users browsing this forum: No registered users and 1 guest