Page 1 of 1

Knock sensor test whit Megastim?

Posted: Sat Jan 23, 2016 9:01 pm
by Rotxam
Hello,

Can i try the knock sensor by plugging it in the P3 spare pin of de megastim. One wire to pin 5 and other at sensor ground ? Ground sensor dont have available pin.

I try the knock sensor directly on DB37 pin 5 and 7 for ground. But its not working.

I have the internal knock module instal on MS3 card.

Sorry for my english.

Re: Knock sensor test whit Megastim?

Posted: Mon Jan 25, 2016 8:22 am
by Matt Cramer
The MS3 knock module needs a frequency based input. The Stim does not have a good way of generating a test signal for it.

Re: Knock sensor test whit Megastim?

Posted: Mon Jan 25, 2016 1:05 pm
by Rotxam
With a hammer for generating a signal ?

Thanks