GX35 on JP8 and JP5

General talk about successes. See older information on MSRUNS forum.

GX35 on JP8 and JP5

Postby ol boy » Thu Feb 01, 2018 3:02 pm

We (HFE Int) ran a Honda 35cc 4 stroke swinging a 22x8 prop on JP8 then on JP5(yes kerosene, jet engine fuel). Initially ran it up on gas using a 4-1 flying magnet trigger wheel and the sequential cam phasing using the MAP pulse then moved the clunk over to the JP8 can and watched the CO% and adjusted from there. Then swapped over to JP5 and repeated. JP8 runs a touch richer than JP5 but could tolerate the same VE fuel table.

Fun, fun Ryan
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS2extra 3.4.x_ish
ol boy
Super MS/Extra'er
 
Posts: 1211
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

Return to Success stories

Who is online

Users browsing this forum: No registered users and 2 guests