Hi i got my RVF-94 400 honda V4 90 degres , 360 Crank running. Converted it from carburettor to MSII with full sequentiell Fuel and ignition. I,m using stock pickup on crank wich is 9 tooth + 3 missing. added a magnet and hall sensor to cam. Fuelpump from wallbro and injectors and tps from VFR800. running good like 20 % more power in low register and like the same in high and little more on absolute top(16000) rpm
bluetooth to computer for tuning with lambda LC1. Starting and running like a dream, just touch the starter and it runs.....
Thanks to everybody in forum for help.
Video:
http://youtu.be/cfDBHpm2NcQ
Right of the screwdriver down, you can se the CLT sensor for MSII(from volvo)
Honda RVF400 NC35 running MSII full seq
Honda RVF400 NC35 running MSII full seq
RC45 RC46 Turbo everyday bike MSIII full seq , RC45 Race bike NC35 Race bike
Re: Honda RVF400 NC35 running MSII full seq
Hi!
I'm very interested in your fuel injected NC35.
Did you use the throttle body from VFR800?
I'd love to convert my NC35 cab to FI.
Regards,
maos
I'm very interested in your fuel injected NC35.
Did you use the throttle body from VFR800?
I'd love to convert my NC35 cab to FI.
Regards,
maos
Re: Honda RVF400 NC35 running MSII full seq
There has been some recent talk about an NC30 project being started. Here's a link to the thread:http://www.msextra.com/forums/viewtopic ... 01&t=58333maos wrote:Hi!
I'm very interested in your fuel injected NC35.
Did you use the throttle body from VFR800?
I'd love to convert my NC35 cab to FI.
Regards,
maos
.