NOS Bike is now working graet with MS3PRO

[jeffmarsh750]

After installing the MS3 pro and running 3 dyno pulls we took it to the track. 1st pass was NA 7.70. 2nd pass with 30% of stage 1 ran 7.35. Added stage 2 at 20% at the big end and our best for testing was 7.01 @ 190mph. MS worked flawless.
We also have all 4 solenoids all being pulsed by MS on seperate channels. We used A and B pwm on a curve with NOS timer as the load

https://www.facebook.com/#!/photo.php?v ... =2&theater

[jsmcortina]

Nice work!

James

[JAM]

Awesome work! are you happy with rev limiter?

[jeffmarsh750]

Still working with the rev limiter. Getting closer though. Will let everyone know when we have some good test data.