1987 Nissan 200SX: VG33E

General talk about successes. See older information on MSRUNS forum.
Post Reply
calvins200sx
MS/Extra Newbie
Posts: 1
Joined: Tue Feb 18, 2014 9:09 am

1987 Nissan 200SX: VG33E

Post by calvins200sx »

Installed MegaSquirt 3.57 CPU running the latest code 3.2.0. Running the stock distributor with a timing wheel install in it. I used the relay PCB board. This is really great for the the wiring that needed to be done. Still in the process of tuning as I just got it running this weekend. Been working on it for about 6 months so I'm excited to get it running and tuning. So far the start up and idle are going good. However the required fuel calculation was way off, called for 21 but that was way too rich as I have it set at 8 to get it started. I'll let everyone know how the tuning goes from this point forward.
Post Reply