Mini A-Series engine , BMW K1100 16v Head

General talk about successes. See older information on MSRUNS forum.
Post Reply
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

1293cc
BMW K1100 16v Cylinder head
MS v3 , wasted spark


https://www.youtube.com/watch?v=JZRnna2jAkc
elutionsdesign
Super MS/Extra'er
Posts: 1341
Joined: Mon Sep 05, 2011 1:20 pm

Re: Mini A-Series engine , BMW K1100 16v Head

Post by elutionsdesign »

Very cool!
Graduate of EFI University.

I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
shambo
MS/Extra Newbie
Posts: 2
Joined: Sat Jul 25, 2015 1:35 pm

Re: Mini A-Series engine , BMW K1100 16v Head

Post by shambo »

LIKE :)
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Re: Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

more done yesterday , got engine filled with water , and upto temp ,

even got wideband working with Tunerstudio and it was doing a bit of self tuning :)

https://www.youtube.com/watch?v=hiaGMipHWUQ

Engine now back home , and plans to fit into car now
ewflyer
Experienced MS/Extra'er
Posts: 233
Joined: Fri Jul 16, 2010 9:38 am

Re: Mini A-Series engine , BMW K1100 16v Head

Post by ewflyer »

Wow, sounds great. Hope you post more videos when it goes into the car.
minicoon
MS/Extra Newbie
Posts: 11
Joined: Wed Apr 27, 2016 9:01 pm

Re: Mini A-Series engine , BMW K1100 16v Head

Post by minicoon »

Do you have any map or base set-ups for this conversion?

I am nearing the finish line for my k1200rs build and would love to know what was tricky about the process?

Cheers
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Re: Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

Sure. Let me dig out my latest map


Sent from my iPhone using Tapatalk
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Re: Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

attached my last known tuner studio setup , i am not saying this is fully mapped, and your setup could be very different.

but it makes my engine run
minicoon
MS/Extra Newbie
Posts: 11
Joined: Wed Apr 27, 2016 9:01 pm

Re: Mini A-Series engine , BMW K1100 16v Head

Post by minicoon »

Could someone way smarter that me have a look at this map and see if there is anything wrong with this map. We are not currently seeing any rpms register in the computer. Please help, desparately trying to get this car going for my wedding car on saturday!

Any help is greatly appreciated

Mark
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Re: Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

first of , what is the tooth logger saying ?
what is your setup ? what wheel you using ? what sensor you using ?

show me setup , and tooth logger screen
minicoon
MS/Extra Newbie
Posts: 11
Joined: Wed Apr 27, 2016 9:01 pm

Re: Mini A-Series engine , BMW K1100 16v Head

Post by minicoon »

I'm sorry you will have to forgive but I have no idea how to find any of those questions out. Very new to EFI. I'm using an edis module with a 36-1 wheel. I'm using the VR sensor that was sent with the microsquirt v3 kit. It's a 1330, map senor and tps.
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
16vmini
Helpful MS/Extra'er
Posts: 73
Joined: Tue Apr 20, 2004 7:44 am
Location: West Sussex / UK
Contact:

Re: Mini A-Series engine , BMW K1100 16v Head

Post by 16vmini »

have you got tuner studio installed and paid for ? if not do that first

http://www.tunerstudio.com/
grom_e30
Super MS/Extra'er
Posts: 4451
Joined: Thu Mar 08, 2012 12:44 pm
Location: UK

Re: Mini A-Series engine , BMW K1100 16v Head

Post by grom_e30 »

minicoon wrote:Could someone way smarter that me have a look at this map and see if there is anything wrong with this map. We are not currently seeing any rpms register in the computer. Please help, desparately trying to get this car going for my wedding car on saturday!

Any help is greatly appreciated

Mark
what i would suggest is: start your own post in the ms2 section detailing your setup, what engine, firing order, the hardware you are using, how you have wired the edis to the microsquirt and include the msq file and some datalogs.
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Post Reply