Mini A-Series engine , BMW K1100 16v Head
-
- Super MS/Extra'er
- Posts: 1341
- Joined: Mon Sep 05, 2011 1:20 pm
Re: Mini A-Series engine , BMW K1100 16v Head
Very cool!
Graduate of EFI University.
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
-
- Helpful MS/Extra'er
- Posts: 73
- Joined: Tue Apr 20, 2004 7:44 am
- Location: West Sussex / UK
- Contact:
Re: Mini A-Series engine , BMW K1100 16v Head
more done yesterday , got engine filled with water , and upto temp ,
even got wideband working with Tunerstudio and it was doing a bit of self tuning
https://www.youtube.com/watch?v=hiaGMipHWUQ
Engine now back home , and plans to fit into car now
even got wideband working with Tunerstudio and it was doing a bit of self tuning
https://www.youtube.com/watch?v=hiaGMipHWUQ
Engine now back home , and plans to fit into car now
Re: Mini A-Series engine , BMW K1100 16v Head
Wow, sounds great. Hope you post more videos when it goes into the car.
Re: Mini A-Series engine , BMW K1100 16v Head
Do you have any map or base set-ups for this conversion?
I am nearing the finish line for my k1200rs build and would love to know what was tricky about the process?
Cheers
I am nearing the finish line for my k1200rs build and would love to know what was tricky about the process?
Cheers
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
-
- Helpful MS/Extra'er
- Posts: 73
- Joined: Tue Apr 20, 2004 7:44 am
- Location: West Sussex / UK
- Contact:
Re: Mini A-Series engine , BMW K1100 16v Head
Sure. Let me dig out my latest map
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Helpful MS/Extra'er
- Posts: 73
- Joined: Tue Apr 20, 2004 7:44 am
- Location: West Sussex / UK
- Contact:
Re: Mini A-Series engine , BMW K1100 16v Head
attached my last known tuner studio setup , i am not saying this is fully mapped, and your setup could be very different.
but it makes my engine run
but it makes my engine run
Re: Mini A-Series engine , BMW K1100 16v Head
Could someone way smarter that me have a look at this map and see if there is anything wrong with this map. We are not currently seeing any rpms register in the computer. Please help, desparately trying to get this car going for my wedding car on saturday!
Any help is greatly appreciated
Mark
Any help is greatly appreciated
Mark
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
-
- Helpful MS/Extra'er
- Posts: 73
- Joined: Tue Apr 20, 2004 7:44 am
- Location: West Sussex / UK
- Contact:
Re: Mini A-Series engine , BMW K1100 16v Head
first of , what is the tooth logger saying ?
what is your setup ? what wheel you using ? what sensor you using ?
show me setup , and tooth logger screen
what is your setup ? what wheel you using ? what sensor you using ?
show me setup , and tooth logger screen
Re: Mini A-Series engine , BMW K1100 16v Head
I'm sorry you will have to forgive but I have no idea how to find any of those questions out. Very new to EFI. I'm using an edis module with a 36-1 wheel. I'm using the VR sensor that was sent with the microsquirt v3 kit. It's a 1330, map senor and tps.
1970 Morris Mini K
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
BMW K1200RS Head mated to standard A+ Mini block
#Deathtrap
Re: Mini A-Series engine , BMW K1100 16v Head
what i would suggest is: start your own post in the ms2 section detailing your setup, what engine, firing order, the hardware you are using, how you have wired the edis to the microsquirt and include the msq file and some datalogs.minicoon wrote:Could someone way smarter that me have a look at this map and see if there is anything wrong with this map. We are not currently seeing any rpms register in the computer. Please help, desparately trying to get this car going for my wedding car on saturday!
Any help is greatly appreciated
Mark
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????