Intermittently worked on this for the last year but finally got all the bugs worked out. Had a lot of sync loss issues with a 24+1 trigger combo so I switched to a 24-2 setup and it's working great so far. The car had a Bosch D-jet system but I tossed the low impedance injectors and made a new rail. Going to add an Eaton M90 with an adapter I recently received but going to enjoy it for a while first. I should probably mention that this car was sitting on the edge of a field for nine years. haha
1975 Volvo 164
B30f I-6
M410 4 speed manual
V3 Microsquirt
Custom fuel rail, 22 lb injectors
Yoshifab CAS, uses a Nissan CAS
D585 coils in wasted spark
AEM WB
GM TPS, IAT, ECT, MAP
1975 Volvo 164
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: 1975 Volvo 164
20 years ago I often caught a ride to work with a friend who had the same car, even the same colour.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
Re: 1975 Volvo 164
Forgot to add a picture of the engine bay. Going to lose the A/C compressor and run the M90 using a dual v-belt setup in that location eventually.
Re: 1975 Volvo 164
Was it fuel injected or carbureted?slow_hemi6 wrote:20 years ago I often caught a ride to work with a friend who had the same car, even the same colour.
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: 1975 Volvo 164
Long time ago but I think it was injected and automatic. Not a common car in Australia.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke