Megasquirt Support Forum (MSEXTRA)

Hello,

Hope you can help, after a not using the tuning s/w/car for awhile then HD failure and an outdated backup I decided to install linux and give Megatunix a go. All good, however Megatunix connects but is unable to detect the firmware revision.

I have attached the MTXlog for info, I have been away, car been in storage so its ages since I've used MS.

Thanks for your help

Regards

darrens wrote:Hello,

Hope you can help, after a not using the tuning s/w/car for awhile then HD failure and an outdated backup I decided to install linux and give Megatunix a go. All good, however Megatunix connects but is unable to detect the firmware revision.

I have attached the MTXlog for info, I have been away, car been in storage so its ages since I've used MS.

Thanks for your help

Regards

You need to provide WHAT FIRMWARE you are running, as well as the OS and MegaTunix version or Git hash.

Hi, thanks for the reply

Firmware MS2/Extra pre2.0 beta 20070818
Megatunix v0.9.23
Ubuntu 11.10

Regards

darrens wrote:Hi, thanks for the reply

Firmware MS2/Extra pre2.0 beta 20070818
Megatunix v0.9.23
Ubuntu 11.10

Regards

That's not a "mainstream" firmware, hence I never created support for it due to it being a non-general release edition.
Mtx has support for MS2-Extra 2.1.0, 2.1.0d, 2.1.0e, 3.0.3w, 3.0.3y, 3.0.x, 3.1.0, 3.1.1_17, 3.1.x.als, and 3.2.1 as of the latest Git revision.

I'm having the same issue. I'm running Ubuntu and Megatunix with the latest git revision compiled today (26 November 2012).

Upgraded to MS2/Extra 3.2.4 today (which I assume went fine as there were no issues with the installer). When I went to run Megatunix, it gave the "could not find firmware" error. I can provide a log if that'd be helpful tomorrow...

Support added for 3.2.4 into the latest Git push (hash 7fe51d776a11c6a293d75d9adeba3dab1b8de5e8)

Thanks!