Hard to start

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
FTGz31
MS/Extra Newbie
Posts: 15
Joined: Tue Dec 04, 2012 11:51 pm

Hard to start

Post by FTGz31 »

Hi guys

For some reason its been really hard to get my car started (Nissan 1986 300zx z31t)

When the car is running the timing is dead on and runs fine. When im cranking it doesnt seem to spark unless i put the throttle down a bit.

Any help would be great, cheers
Top
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: Hard to start

Post by Matt Cramer »

Please also attach a data log of the problem.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Top
FTGz31
MS/Extra Newbie
Posts: 15
Joined: Tue Dec 04, 2012 11:51 pm

Re: Hard to start

Post by FTGz31 »

It started a little eaiser this time
Top
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: Hard to start

Post by Matt Cramer »

The RPM signal is dropping out. Can you post a tooth log of what's happening?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Top
FTGz31
MS/Extra Newbie
Posts: 15
Joined: Tue Dec 04, 2012 11:51 pm

Re: Hard to start

Post by FTGz31 »

Sorry for the late reply

I hope this is what you need

Cheers
Top
Post Reply

Return to “Tuner Studio”