I can understand this would be low on the priority list, but I really would like to see a simple (one-level) Undo added into the Designer Mode.
There are hardly much more annoying things then accidently deleting a tediously designed multi-gauge cluster, and not being able to bring it back with a simple CTRL-Z.
Don't ask me how I know!
Feature Request: CTRL-Z in TS Designer Mode
Moderator: LT401Vette
-
- Experienced MS/Extra'er
- Posts: 372
- Joined: Sat Dec 31, 2011 6:10 am
- Location: Netherlands
- Contact:
Feature Request: CTRL-Z in TS Designer Mode
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Feature Request: CTRL-Z in TS Designer Mode
I've been there myself. I would like to see a CTRL Z myself. Isn't trivial to implement though. Hopefully things will free up a little soon to get that in there.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 372
- Joined: Sat Dec 31, 2011 6:10 am
- Location: Netherlands
- Contact:
Re: Feature Request: CTRL-Z in TS Designer Mode
a Copy/Paste function across tabs would be nice too. After I accidentally deleted a number of items today, I wanted to 'copy' them from another tab but there was no such thing.
Although I thought I had seen a copy-function once before.
Or maybe something like CTRL+ALT and dragging an existing button/gauge item, would create an identical copy of the item, so you just have to change the properties.
Although I thought I had seen a copy-function once before.
Or maybe something like CTRL+ALT and dragging an existing button/gauge item, would create an identical copy of the item, so you just have to change the properties.
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Feature Request: CTRL-Z in TS Designer Mode
You can copy and paste from one dash to another.
Both dashes have to be in designer mode, but it shouldn't be a problem to copy on one dash and paste on another.
Both dashes have to be in designer mode, but it shouldn't be a problem to copy on one dash and paste on another.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html