I am seriously considering getting a transreflective 7 or 8 inch touchscreen LCD for a digital dash. They are not cheap though at £320 and I will have to save up.
They have a native resolution of 800x480, so i should get the components I want on the dash, but what I'd like to be able to do is have a button or similar when fullscreened, so i can have each gauge on a separate dash, and scroll through them.
Is this possible at all?
Cheers,
Kristian
Scrolling through full screen dashboards
Moderator: LT401Vette
Scrolling through full screen dashboards
Constantly evolving;
4 cylinder n/a, 16v 1368cc Fiat Seicento
4 cylinder n/a, 16v 1368cc Fiat Seicento
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Scrolling through full screen dashboards
Do you mean in full screen dash mode?
If so, It isn't possible on the current release, but it wouldn't be very hard.
If so, It isn't possible on the current release, but it wouldn't be very hard.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: Scrolling through full screen dashboards
Yes, in full screen.
It's not a major issue, you'd just be something i would find useful. I'm sure i could automate it somehow using a marco attached to a screen touch.
I may be able to fit all the gauges i want on the small resolution display anyway, then it wouldn't be an issue.
IF it isn't too hard, and you have some time, it may be a nice feature, but focus on the important stuff.
Your doing a great job!
Kristian
It's not a major issue, you'd just be something i would find useful. I'm sure i could automate it somehow using a marco attached to a screen touch.
I may be able to fit all the gauges i want on the small resolution display anyway, then it wouldn't be an issue.
IF it isn't too hard, and you have some time, it may be a nice feature, but focus on the important stuff.
Your doing a great job!
Kristian
Constantly evolving;
4 cylinder n/a, 16v 1368cc Fiat Seicento
4 cylinder n/a, 16v 1368cc Fiat Seicento