Datalog problem

matnrach · Post by **matnrach** » Sun May 31, 2009 10:47 am

Its probably been mentioned on here before, if it has sorry.

Just done my first datalog using TS instead of Megatune and when viewing in MLV the highlighted load bins do not seem to follow the actual load that is logged.

For example 1.4bar abs seems to be highlighted in the 0.5bar bin.
The real time values are shown correctly as are the logged values, its just the highlighted bins.

Is there a setting I need to change in TS?

LT401Vette · Post by **LT401Vette** » Sun May 31, 2009 11:32 am

This sounds more like a setting being off in MLV.

Post a short log and msq, that will help to see what you have going on.

matnrach · Post by **matnrach** » Sun May 31, 2009 12:05 pm

Thought it might be a MLV setting.
It was the Y axis field being set to TP instead of MAP

Sorted now. Thanks.

LT401Vette · Post by **LT401Vette** » Sun May 31, 2009 12:19 pm

good deal.

Megasquirt Support Forum (MSEXTRA)

Datalog problem

Datalog problem

Re: Datalog problem

Re: Datalog problem

Re: Datalog problem