Last night I was tuning MS2 RC3 2.1.0 on my Jag having changed from "dont mulitply MAP" to "muliply map" and ran out of VE table values (<255) due to the small req_fuel value I was using. This called for increasing my Req_fuel value and the corresponding change to the entire VE table.
For the first time ever, I used the "Reset req_fuel" feature in MT (which changed the VE table but did not burn the new Req_fuel value in "engine constants" - which I had to then do manually)
This feature does not exist in TS? Is the idea to do it manually with the math buttons available?
Reset Req_fuel in VE table?
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 1004
- Joined: Thu Feb 16, 2006 6:18 am
- Location: George, South Africa
Reset Req_fuel in VE table?
Kind regards
Philip
'74 Jensen Interceptor 440ci (EFI'ed with MS2 and wasted spark + GM 4L60e GPIO controlled - both on Extra FW)
Philip
'74 Jensen Interceptor 440ci (EFI'ed with MS2 and wasted spark + GM 4L60e GPIO controlled - both on Extra FW)
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Reset Req_fuel in VE table?
It sounds like a bundling of regular actions in MT. It sounds like a sensible idea, but to be honest I never saw it, never heard of it so never built it. I'll put it on the list though.
There is an option to update the req_fule, but due to an MT limitation that only works if the VE table is on the same page as the req fuel, so it is really just a way to simplify the math for you.
Current req_fuel: 6
new req_fule:5
it scales the table by 6/5 or multiply by 1.2
There is an option to update the req_fule, but due to an MT limitation that only works if the VE table is on the same page as the req fuel, so it is really just a way to simplify the math for you.
Current req_fuel: 6
new req_fule:5
it scales the table by 6/5 or multiply by 1.2
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html