Is it possible to have the numbers in the "Target AFR's for VE Table 1" read in AFR as I did in MegaTune?
I suspect there is a way to change this, but I haven't found it yet...
target AFR's for VE Table
Moderator: LT401Vette
-
- MS/Extra Newbie
- Posts: 9
- Joined: Wed Jun 11, 2008 12:26 am
- Location: Toronto Ontario Canada
- Contact:
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: target AFR's for VE Table
Yes, go to you Project Properties and Settings and make sure AFR is selected.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 9
- Joined: Wed Jun 11, 2008 12:26 am
- Location: Toronto Ontario Canada
- Contact:
Re: target AFR's for VE Table
Thanks, I thought it had to be possible.
92 Sunburst Miata, 1.8L, MSPnP, BRP MP62 130/62.5 pulleys, 460CC injectors, Lotsa Smiles