TS does not want to convert SD logs

Keithg · Post by **Keithg** » Sat Oct 10, 2009 11:45 am

I was able to do this previously. Since upgrading to the latest beta code, I can no longer convert binary logs to MSL format. Beta 0051.001

Keith

Post by **jsmcortina** » Sat Oct 10, 2009 11:49 am

keithg wrote: Beta 0051.001

That's the serial format not the code revision!

James

Tjabo · Post by **Tjabo** » Sat Oct 10, 2009 1:22 pm

I have had the same problem since upgrading to the latest code that Keith is reporting, but I didn't think anything of it and haven't gotten back to it since. Also I have to confess that I would have called the code version by the same number at Keith did, since it seems to be in the same place where the 46j (or whatever) was previously. . . Was 46j a serial format, or a code version?

Not that me being wrong too really makes anyone else less wrong or anything!

Later!

Thad

Post by **jsmcortina** » Sun Oct 11, 2009 6:06 am

The one with the date/time in it is the code version. The other one is the serial format string.

James

Keithg · Post by **Keithg** » Sun Oct 11, 2009 6:53 am

The version I am running is the 0914 beta

KeithG

Tjabo · Post by **Tjabo** » Sun Oct 11, 2009 7:09 am

Me too.

Keithg · Post by **Keithg** » Sun Oct 11, 2009 8:14 am

Like Tjabo says, it used to report a version number in the header of the TS window in XP. Now, it shows the 0051.001 value. Sounds like it should show the version or the release date or something else more useful?

KeithG

LT401Vette · Post by **LT401Vette** » Sun Oct 11, 2009 7:17 pm

There was a minor change to the ini to support internal variables, have been looking to get VE analyze doing before a release but I have quite a few important fixes that need to get out. I will try to get a release out in the next day or 2. I'll just hide the VE analyze stuff.

BTW if you connect to the controller you will get the more descriptive string in the title bar. All that is in the ini is the signature, so that is what is displayed until you connect.

Post by **jsmcortina** » Mon Oct 12, 2009 5:22 pm

The problem Keith and Thad are seeing is something that I saw a few weeks back and actually turned out to be me sending the wrong length serial format string coupled with TS not handling it perfectly. Only realised that this is the problem in that snapshot while trying some things via IM with Keith this evening.

If my current XGATE spark code and testing goes slowly I'll likely put out a fixed version of the previous code snapshot in the interim.

James

Megasquirt Support Forum (MSEXTRA)

TS does not want to convert SD logs

TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs

Re: TS does not want to convert SD logs