Is the coolant temp scale of the PWM Idle Duty Cycle and warmup Enrichment Curve supposed to be tied together? When I change one it changes the other one.
Version v0.999.3
Edit: now I see the same for Afterstart Enrichment, Cranking pulsewidth and priming pulsewith screens are tied together
Megasquirt MSEXTRA and MS3EFI support forum
Support and discussion forum for Megasquirt 1, 2 and 3
MegaSquirt Forums: MSefi, MSextra, MS Success Stories, MS User Groups, MicroSquirt, MSgpio
Quick links: Manuals : Megasquirt info
Changing coolant temp value on one screen changes others
Moderator: LT401Vette
5 posts
• Page 1 of 1
Changing coolant temp value on one screen changes others
by whodwho » Wed Jul 21, 2010 7:40 pm
Last edited by whodwho on Wed Jul 21, 2010 8:38 pm, edited 2 times in total.
- whodwho
- MS/Extra Newbie
- Posts: 8
- Joined: Sat Mar 08, 2008 8:37 pm
Re: Change coolant temp value on one screen changes other - Bug?
by LT401Vette » Wed Jul 21, 2010 8:06 pm
That is actually a firmware question, so to answer it correctly you would need to state what firmware you are running.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
LT401Vette - Super MS/Extra'er
- Posts: 3212
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Charlotte, NC
Re: Change coolant temp value on one screen changes other - Bug?
by whodwho » Wed Jul 21, 2010 8:36 pm
It is 3.0.3u with shows up as 3.0.3s
This was really screwing with me, now that I know it does that I can work around it but do know if it has always been that way?
Sorry to assume it was TS, I will try to change the title and take Bug out of the title.
Thanks for the great work and a quick response.
This was really screwing with me, now that I know it does that I can work around it but do know if it has always been that way?
Sorry to assume it was TS, I will try to change the title and take Bug out of the title.
Thanks for the great work and a quick response.
- whodwho
- MS/Extra Newbie
- Posts: 8
- Joined: Sat Mar 08, 2008 8:37 pm
Re: Changing coolant temp value on one screen changes others
by jsmcortina » Thu Jul 22, 2010 1:44 am
Yes it has always been that way and it is the way the firmware is written. It originates from MS2/BG.
James
James
I can supply, repair or upgrade Megasquirts in UK
My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
- jsmcortina
- Site Admin
- Posts: 12477
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
Re: Changing coolant temp value on one screen changes others
by whodwho » Thu Jul 22, 2010 6:20 am
Thanks James for the confirmation.
So knowing that I can work around it but sure screwed with me for a while and can't say I ever read that anywhere to watch for that.
Thank you both
So knowing that I can work around it but sure screwed with me for a while and can't say I ever read that anywhere to watch for that.
Thank you both
- whodwho
- MS/Extra Newbie
- Posts: 8
- Joined: Sat Mar 08, 2008 8:37 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests