TunerStudio MS 1.0 Released
Moderator: LT401Vette
Re: TunerStudio MS 1.0 Released
Linear interpolation not working correctly for me in the spark table (new 4/12 beta)
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: TunerStudio MS 1.0 Released
It is linearly interpolated on the x & y values, not the cell index.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: TunerStudio MS 1.0 Released
I restarted and everything is fine.
Re: TunerStudio MS 1.0 Released
Hi Phil,
Running 1.002. I just started using table switching, and I just noticed when I bring up ignition table 3, the window title is spark table1. It's still the correct table, just a minor labeling thing. Just thought I'd point it out for the next update!
Cheers!
Greg
Running 1.002. I just started using table switching, and I just noticed when I bring up ignition table 3, the window title is spark table1. It's still the correct table, just a minor labeling thing. Just thought I'd point it out for the next update!
Cheers!
Greg
1996 Mazda MX-5 1.6L NA6/ Mazdaspeed M45 SC/ BSP AW Intercooler/ Maruha F-cams/ 425cc RX-8 injectors/ DIYPNP
MS2/Extra test mule
MS2/Extra test mule
Re: TunerStudio MS 1.0 Released
I identified that as well.
It's also present in 1.003 (Beta).
It's also present in 1.003 (Beta).
Golf II + 1.8T 20V + MSII V3.0 http://eight620vt.tk/
Re: TunerStudio MS 1.0 Released
i'm curious if the issue has been fixed where incorrect timing information was displayed in the composite ignition logger window?
see here: http://msextra.com/forums/viewtopic.php ... 40#p265592
see here: http://msextra.com/forums/viewtopic.php ... 40#p265592
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: TunerStudio MS 1.0 Released
That issue I believe is fixed in 1.002, in 1.03 for sure.
I have recently covered I "think" the remainder of wheel pattern scenarios with some additional display options. Most of this work was in the MLV beta, but have been refactored back into TunerStudio for the next release.
If you download the MLV beta, that is the latest and greatest for Ignition logger display:
http://www.efianalytics.com/MegaLogViewer/beta/
I have recently covered I "think" the remainder of wheel pattern scenarios with some additional display options. Most of this work was in the MLV beta, but have been refactored back into TunerStudio for the next release.
If you download the MLV beta, that is the latest and greatest for Ignition logger display:
http://www.efianalytics.com/MegaLogViewer/beta/
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: TunerStudio MS 1.0 Released
Do you have a wishlist thread Phil? for TunerStudio improvements etc
One thing I'd like to see is a "Recent Projects" menu under File, so you can have say File > Project > New, Recent, Open or Close options, so that way I can navigate to other Projects quicker, especially useful when I am testing/using different MicroSquirts back to back.
One thing I'd like to see is a "Recent Projects" menu under File, so you can have say File > Project > New, Recent, Open or Close options, so that way I can navigate to other Projects quicker, especially useful when I am testing/using different MicroSquirts back to back.
Last edited by 24c on Thu Jul 21, 2011 11:45 am, edited 1 time in total.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: TunerStudio MS 1.0 Released
You know that has been on the todo list for literally years, so long I forgot about it among the other 487 items
But that one is easy, so let me get it off.
But that one is easy, so let me get it off.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: TunerStudio MS 1.0 Released
I like the sound of this, you're such a splendid fellow.LT401Vette wrote:...that one is easy, so let me get it off.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
-
- Helpful MS/Extra'er
- Posts: 46
- Joined: Tue Oct 06, 2009 2:26 pm
- Location: lakeland fl
Re: TunerStudio MS 1.0 Released
with the full version you are able to use it on multiple units correct??? Thanks Stephen
89 swift gt turbo 1.6/1.3 with hyundai accent trans
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: TunerStudio MS 1.0 Released
Yes, there is no limit to the units you connect too and it is not locked to 1 PC. The agreement is for 1 user on up to 3 computers.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 46
- Joined: Tue Oct 06, 2009 2:26 pm
- Location: lakeland fl
Re: TunerStudio MS 1.0 Released
ok making sure i have 2 units and maybe a third soon. Thanks stephen
89 swift gt turbo 1.6/1.3 with hyundai accent trans
-
- Master MS/Extra'er
- Posts: 847
- Joined: Tue Jan 20, 2009 10:21 am
- Location: Lancashire UK
- Contact:
Re: TunerStudio MS 1.0 Released
I'm OK, as long as using VMs (Virtual Machines, Linux, Windows XP etc) doesn't count as separates.LT401Vette wrote:... The agreement is for 1 user on up to 3 computers.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
Re: TunerStudio MS 1.0 Released
Hi Phil!
I have a minor wish you could take a look at in an upcoming update.
Ability to "snap to grid" or something similar when in designer mode. Both for location and size on the gauges. Much easier to align everything, and get a good looking dash.
I have a minor wish you could take a look at in an upcoming update.
Ability to "snap to grid" or something similar when in designer mode. Both for location and size on the gauges. Much easier to align everything, and get a good looking dash.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.