TunerStudio MS 1.0 Released

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

djp0623
Helpful MS/Extra'er
Posts: 129
Joined: Sat Nov 21, 2009 9:28 pm

Re: TunerStudio MS 1.0 Released

Post by djp0623 »

Linear interpolation not working correctly for me in the spark table (new 4/12 beta)
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: TunerStudio MS 1.0 Released

Post by LT401Vette »

It is linearly interpolated on the x & y values, not the cell index.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
djp0623
Helpful MS/Extra'er
Posts: 129
Joined: Sat Nov 21, 2009 9:28 pm

Re: TunerStudio MS 1.0 Released

Post by djp0623 »

I restarted and everything is fine.
Greg G
Experienced MS/Extra'er
Posts: 311
Joined: Thu Mar 10, 2011 11:33 pm

Re: TunerStudio MS 1.0 Released

Post by Greg G »

Hi Phil,

Running 1.002. I just started using table switching, and I just noticed when I bring up ignition table 3, the window title is spark table1. It's still the correct table, just a minor labeling thing. Just thought I'd point it out for the next update!

Cheers!

Greg
1996 Mazda MX-5 1.6L NA6/ Mazdaspeed M45 SC/ BSP AW Intercooler/ Maruha F-cams/ 425cc RX-8 injectors/ DIYPNP

MS2/Extra test mule :)
HidRo
Super MS/Extra'er
Posts: 1172
Joined: Mon Dec 28, 2009 4:56 pm
Location: Portugal
Contact:

Re: TunerStudio MS 1.0 Released

Post by HidRo »

I identified that as well.
It's also present in 1.003 (Beta).
Image
Golf II + 1.8T 20V + MSII V3.0 http://eight620vt.tk/
bmw5002
Helpful MS/Extra'er
Posts: 83
Joined: Wed Nov 03, 2010 8:49 pm

Re: TunerStudio MS 1.0 Released

Post by bmw5002 »

i'm curious if the issue has been fixed where incorrect timing information was displayed in the composite ignition logger window?
see here: http://msextra.com/forums/viewtopic.php ... 40#p265592
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: TunerStudio MS 1.0 Released

Post by LT401Vette »

That issue I believe is fixed in 1.002, in 1.03 for sure.
I have recently covered I "think" the remainder of wheel pattern scenarios with some additional display options. Most of this work was in the MLV beta, but have been refactored back into TunerStudio for the next release.
If you download the MLV beta, that is the latest and greatest for Ignition logger display:
http://www.efianalytics.com/MegaLogViewer/beta/
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
24c
Master MS/Extra'er
Posts: 847
Joined: Tue Jan 20, 2009 10:21 am
Location: Lancashire UK
Contact:

Re: TunerStudio MS 1.0 Released

Post by 24c »

Do you have a wishlist thread Phil? for TunerStudio improvements etc

One thing I'd like to see is a "Recent Projects" menu under File, so you can have say File > Project > New, Recent, Open or Close options, so that way I can navigate to other Projects quicker, especially useful when I am testing/using different MicroSquirts back to back.
Last edited by 24c on Thu Jul 21, 2011 11:45 am, edited 1 time in total.
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: TunerStudio MS 1.0 Released

Post by LT401Vette »

You know that has been on the todo list for literally years, so long I forgot about it among the other 487 items :)
But that one is easy, so let me get it off. :)
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
24c
Master MS/Extra'er
Posts: 847
Joined: Tue Jan 20, 2009 10:21 am
Location: Lancashire UK
Contact:

Re: TunerStudio MS 1.0 Released

Post by 24c »

LT401Vette wrote:...that one is easy, so let me get it off. :)
I like the sound of this, you're such a splendid fellow. :D
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
stephennmm
Helpful MS/Extra'er
Posts: 46
Joined: Tue Oct 06, 2009 2:26 pm
Location: lakeland fl

Re: TunerStudio MS 1.0 Released

Post by stephennmm »

with the full version you are able to use it on multiple units correct??? Thanks Stephen
89 swift gt turbo 1.6/1.3 with hyundai accent trans
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: TunerStudio MS 1.0 Released

Post by LT401Vette »

Yes, there is no limit to the units you connect too and it is not locked to 1 PC. The agreement is for 1 user on up to 3 computers.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
stephennmm
Helpful MS/Extra'er
Posts: 46
Joined: Tue Oct 06, 2009 2:26 pm
Location: lakeland fl

Re: TunerStudio MS 1.0 Released

Post by stephennmm »

ok making sure i have 2 units and maybe a third soon. Thanks stephen
89 swift gt turbo 1.6/1.3 with hyundai accent trans
24c
Master MS/Extra'er
Posts: 847
Joined: Tue Jan 20, 2009 10:21 am
Location: Lancashire UK
Contact:

Re: TunerStudio MS 1.0 Released

Post by 24c »

LT401Vette wrote:... The agreement is for 1 user on up to 3 computers.
I'm OK, as long as using VMs (Virtual Machines, Linux, Windows XP etc) doesn't count as separates. :)
Yamaha GTS1000 v2 MicroSquirt, B&G 2.891
Yamaha GTS1000 v3 beta MicroSquirt, B&G3.760
Yamaha GTS1000 MSExtra 3.1, Dual VR Board
Yamaha YZF1000 MSExtra 3.1
eMTea
Experienced MS/Extra'er
Posts: 341
Joined: Wed Jan 19, 2005 1:52 pm

Re: TunerStudio MS 1.0 Released

Post by eMTea »

Hi Phil!

I have a minor wish you could take a look at in an upcoming update.
Ability to "snap to grid" or something similar when in designer mode. Both for location and size on the gauges. Much easier to align everything, and get a good looking dash.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
Post Reply