smoothing feature on 2.1.16
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
smoothing feature on 2.1.16
gimme a quick tutorial on how to use the table smoothing feature on 2.1.16 and how to set the factor...basic theory and operation stuff is what I really need .
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
Re: smoothing feature on 2.1.16
How did you find this version? I looked at the tuner studio website and the latest is 2.1.1 and 2.0.8.
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
Re: smoothing feature on 2.1.16
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: smoothing feature on 2.1.16
Yes, there are parts of that that are not finished yet and not fully tested or supported. That is why it is in the alpha folder. It was needed for testing with the latest alpha MS2Extra firmware though.
I do expect to have it ready for beta this week.
I do expect to have it ready for beta this week.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: smoothing feature on 2.1.16
Anyway to the point of the OP...nismoautoxr wrote:gimme a quick tutorial on how to use the table smoothing feature on 2.1.16 and how to set the factor...basic theory and operation stuff is what I really need .
That function is in the beta already. It will also be in the next release of MLV.
The smoothing factor controls how much weighting is given to the surrounding table cells vs each individual cell.
The value should be between 0 & 1.0 with
0 = 0% of the surrounding cell values are considered, thus no smoothing will be done.
1.0 = 100%, so each cell value itself is not considered, the output value is driven entirely by the values of the surrounding cells, thus this will smooth the most.
The default value is 0.7, to change the smoothing factor right click on the smoothing button.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
Re: smoothing feature on 2.1.16
so to use the smoothing feature then one would higlight the area that one wants smoothed or just the particular cell in question...say like you got one large or small cell inthe middle of som very differant ones....how does it work?
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: smoothing feature on 2.1.16
Yes, select 1 cell, whole table, or any set of cells. The selected cells will be smoothed, the rest left alone.
Try it, it is best of you open a 3D table next to it so you can see the smoothing.
Also as always if you hold the mouse over any changed cell it will tell you the original value in the tooltip.
Try it, it is best of you open a 3D table next to it so you can see the smoothing.
Also as always if you hold the mouse over any changed cell it will tell you the original value in the tooltip.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
Re: smoothing feature on 2.1.16
gotcha thanks.
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI