VEAL tuning secondary injectors

[LT401Vette]

See attached.

[chase350z]

help
with the new 1.5.1 firmware i cant find the Ve table 1 throw Ve table 4 section in the maincontroller.ini file to cancel out the over run filter for staged.

could i just add the custom ini file to the projectscfg file to make it work.

thanks chase

[sschutte]

with the new 1.5.1 firmware i cant find the Ve table 1 throw Ve table 4 section in the maincontroller.ini file to cancel out the over run filter for staged.

I am not sure I understand?

Can you please break this down so we can get a clear understanding of:

• What you are tyring to accomplish
• The steps you have already tried(and their outcomes)
• What issues you ran into. (Error messages or screenshots would be great)

Sharing your MSQ would help us when we go to review/reproduce the issue that you are reporting.

[chase350z]

with the new 1.5.1 firmware i cant find the Ve table 1 throw Ve table 4 section in the maincontroller.ini file to cancel out the over run filter for staged.

I am not sure I understand?

Can you please break this down so we can get a clear understanding of:

• What you are tyring to accomplish
• The steps you have already tried(and their outcomes)
• What issues you ran into. (Error messages or screenshots would be great)

Sharing your MSQ would help us when we go to review/reproduce the issue that you are reporting.

commenting out the overrun filter for the auto-tune in the main controller with a ; with the 1.5.1 firmware the ve table 1, ve table 2, ve table 3, are missing i looked over the hole main controller file a few times and could not find it like it was in the older firmwares .


thanks chase

[Brian H EFI]

with the new 1.5.1 firmware i cant find the Ve table 1 throw Ve table 4 section in the maincontroller.ini file

I am not sure what text editor you are using but if you press Ctrl + f it should open a find dialog, then if you search the ms3pro.ini file for "Fuel VE Table 1" you should find them they start at line 12431.

[chase350z]

Yea there is only one spot with fuel ve tabes and it doesn't have the over run filter in it at all its not like the past firmware i guess