menu for setting WB type

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
abriggs
MS/Extra Newbie
Posts: 12
Joined: Wed Oct 09, 2013 9:39 am

menu for setting WB type

Post by abriggs »

I have searched all the TS menus I could see and couldn't find one to set what WB you have. I have LC-1 and it doesn't work with extra and when I use my B&G MS@ controller all is fine.
Top
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: menu for setting WB type

Post by Matt Cramer »

What firmware?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Top
jsmcortina
Site Admin
Posts: 39615
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Re: menu for setting WB type

Post by jsmcortina »

See:
http://www.msextra.com/doc/general/whatmegasquirt.html

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
abriggs
MS/Extra Newbie
Posts: 12
Joined: Wed Oct 09, 2013 9:39 am

Re: menu for setting WB type

Post by abriggs »

ms2extra 3.3.1
Top
abriggs
MS/Extra Newbie
Posts: 12
Joined: Wed Oct 09, 2013 9:39 am

Re: menu for setting WB type

Post by abriggs »

got it. Didn't know to unlock sensors.
Top
Post Reply

Return to “Tuner Studio”