Hi,
I have a base tune for my engine. It is for an MS2 and I have an MS3. How would I import this tune so that it suits my MS3. I am very new to this and have connected to my MS3 for the first time today
Thanks,
New user question tune files!
Moderator: LT401Vette
-
- Helpful MS/Extra'er
- Posts: 66
- Joined: Sun Jun 01, 2014 12:50 am
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: New user question tune files!
MS3 can import much of an MS2/Extra tune file, but a few settings won't copy over. It will give a list of warnings about what settings did not translate over directly at that point.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Helpful MS/Extra'er
- Posts: 66
- Joined: Sun Jun 01, 2014 12:50 am
Re: New user question tune files!
hiMatt Cramer wrote:MS3 can import much of an MS2/Extra tune file, but a few settings won't copy over. It will give a list of warnings about what settings did not translate over directly at that point.
I did a compare tune with tuner studio and I selected to load the settings from the base tune. I have made sure that my ignition and injectors are set-up as they should be for my engine but is there more I need to do before initial start? or have I gone about this all wrong?
thanks,
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: New user question tune files!
That's most of the way there.
Matt Cramer -1966 Dodge Dart slant six running on MS3X