Protocol Error

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Protocol Error

Post by joseedgardosanchez »

Hi, I have similar problem with the difference that i have Egt can box and lost the communication with the egt box. If i could send you the (TunerStudioAppDebug.txt) file you can see it?
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Protocol Error

Post by joseedgardosanchez »

joseedgardosanchez wrote:Hi, I have similar problem with the difference that i have Egt can box and lost the communication with the egt box. If i could send you the (TunerStudioAppDebug.txt) file you can see it?
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: Protocol Error

Post by racingmini_mtl »

Try to run the port scanner: http://forum.jbperf.com/viewtopic.php?f=2&t=1282. If you see the CAN-EGT listed then your issue might be a TunerStudio issue. If you don't see it listed then it is something else related to the ECU, the CAN bus or the CAN-EGT.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
Post Reply