Hi all, i've recently purchased a Qstarz 818xt gps dongle but cannot get it working with tunerstudio. Bluetooth or usb connection is working fine, and i can successfully utilize the GPS with other software such as Racechrono and Qstars GPSview.
The problem is when used with Tunerstudio the only data i get is the number of connected satellites, no speed, no altitude, no bearing, no position etc. Can anyone help?
818xt GPS problems
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: 818xt GPS problems
If you are getting the number of satellites, all the data _should_ be there.
Is your MS and MS3?
Does a Data Log contain the GPS data?
Are you selecting the GPS gauges by right clicking and selecting:
GPS --> XXXXXXXX Gauge
Is your MS and MS3?
Does a Data Log contain the GPS data?
Are you selecting the GPS gauges by right clicking and selecting:
GPS --> XXXXXXXX Gauge
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html