Tunerstudio FIDLE indication

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Spike243
MS/Extra Newbie
Posts: 20
Joined: Mon May 18, 2015 12:30 pm

Tunerstudio FIDLE indication

Post by Spike243 »

Hey everybody,

I am looking to place an indicator for FIDLE (Im using it for fan control) on the tunerstudio gauge cluster but I don't know what output channel to trigger the indicator off of. I cant find anything online to show which output I need to trigger on since there is no one labeled "FIDLE".

This thread would have been perfect but it never got answered. http://www.msextra.com/forums/viewtopic ... 55&start=0

-Im running MS2/extra 3.4.0

Thanks for the help everyone!
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Tunerstudio FIDLE indication

Post by jsmcortina »

Take a look at the "PORTx" indicators in the dash indicators section of the Megasquirt-2 TunerStudio Reference manual.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Spike243
MS/Extra Newbie
Posts: 20
Joined: Mon May 18, 2015 12:30 pm

Re: Tunerstudio FIDLE indication

Post by Spike243 »

Thanks! That pointed me in the right direction!
Post Reply