Edis 8 5 tooth. engine does not start

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
promobass
MS/Extra Newbie
Posts: 1
Joined: Thu Jan 28, 2016 3:10 pm
Location: Moscow
Contact:

Edis 8 5 tooth. engine does not start

Post by promobass »

Hello, I'm from Russia . I do not speak English well. I use gogle transite. I have a problem , my engine HEMI DAYTONA 2006. Ecu ms2 extra, ignition system edis 8 .
My engine will not start if you set vr sensor 5-6 tooth. It starts badly to wind up only if vr sensor set 7-8 after a missed tooth tooth . ignition setting- fixed time 10 deegree. Later I will make tuning ecu.
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: Edis 8 5 tooth. engine does not start

Post by Matt Cramer »

:msq:
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply