Hi,
Searched the TS manual and forum, can't find the info, apologies if this has already been answered.
I see in the forum post for Firmware 1.5 A4 that 128 bit on board SD card logging was provided. http://www.msextra.com/forums/viewtopic ... 25&t=62158
"Get 128 byte SDcard logs reading back in TS."
I'm running the 1.5 a4 firmware and Tuner Studio 2.9.114.
Can I enable 128 bit SD logging with that combo?
What does it allow over 64 bit?
Thanks
SD Card data logging and 128 bit, what is it?
Moderator: LT401Vette
-
arran
- Master MS/Extra'er
- Posts: 617
- Joined: Mon Oct 29, 2012 2:34 am
- Location: Brisbane Australia
- Contact:
SD Card data logging and 128 bit, what is it?
RX7 Series 2 13B Turbo. Megasquirt 3 with 3X Expander and V3 CPU. Firmware 1.4.1
Knock module, twin EGT, real time clock, WBO2, full sequential fuel and spark
http://web.aanet.com.au/arran
Knock module, twin EGT, real time clock, WBO2, full sequential fuel and spark
http://web.aanet.com.au/arran
-
jsmcortina
- Site Admin
- Posts: 39610
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: SD Card data logging and 128 bit, what is it?
It allows 64 bytes (not bits) of data per sample, so you can record more fields.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".