No thermistor tables
Moderator: LT401Vette
No thermistor tables
Greetings. I am using MS3 1.4.0 with extension board. I am tuning using the MS3 and not the extension at this time. The TunerStudio tools section has the thermistor configuration button greyed out. I.E. I cannot access the thermistor tables.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: No thermistor tables
First select:
Tools --> Un/Lock Calibrations
Tools --> Un/Lock Calibrations
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: No thermistor tables
I should have seen that option..................thank you for the help, that was easy.
regards,
al
regards,
al