Tuner studio logging only trigger

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
nzgrub
Helpful MS/Extra'er
Posts: 47
Joined: Sat Nov 09, 2013 11:40 am
Location: Kaeo, New Zealand
Contact:

Tuner studio logging only trigger

Post by nzgrub »

2016-09-12_18.41.01.csv
rvr2016-09-12_19.00.19.msq
Hi all, I can't for the life of me get tuner studio to log any more than the trigger wheel. attached is msq and log file.
I have full paid version of tunerstudio MS 3.0.05
and full paid version of megalog viewer MS 4.1.09
slow_hemi6
Super MS/Extra'er
Posts: 4122
Joined: Fri May 07, 2004 3:33 am
Location: Australia

Re: Tuner studio logging only trigger

Post by slow_hemi6 »

To do a full log you have to go up to the Data Logging tab at the top of the Tuner studio window. Use the Start and Stop logging selections. You can also use the ctrl L enter short cut and ctrl B short cut to stop.
Find the Manuals up top under Quick links: Manuals. :RTFM:
Cheers Luke
nzgrub
Helpful MS/Extra'er
Posts: 47
Joined: Sat Nov 09, 2013 11:40 am
Location: Kaeo, New Zealand
Contact:

Re: Tuner studio logging only trigger

Post by nzgrub »

Oh ok then
In the words of my son who is a software designer and IT pro "that is very counter intuitive"
You would think that where there is a drop down to select the type of log and a start button next to it would be what you use.

Thanks for the reply have logs to work from now.
jsmcortina
Site Admin
Posts: 39569
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Tuner studio logging only trigger

Post by jsmcortina »

I'd have thought that "Datalogging" was pretty intuitive? It is covered in the manuals as well.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply