I would like to use the individual fuel trim tables to help dial in the fueling but they are grey and i cannot click on them to open. Does something in the settings have to be selected for them to become availible? i've tried everything i could think of. I'll be using EGT's to help tune individual cylinders. (MS3Pro ECU)
Thanks,
Anthony
Individual Fuel Trims Tables
Moderator: LT401Vette
-
- MS/Extra Newbie
- Posts: 4
- Joined: Thu Nov 19, 2015 1:05 pm
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Individual Fuel Trims Tables
Basic/Load Settings --> Engine and Sequential Settings --> Injector Trim
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html