Unable to modify VE or ignition table

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Chiburbian
Helpful MS/Extra'er
Posts: 108
Joined: Mon Aug 08, 2011 11:03 am

Unable to modify VE or ignition table

Post by Chiburbian »

Here is the problem:
(TS MS Ultra - 3.0.12.02)

I am able to modify values on me VE table when not connected to the megasquirt. I can modify the table, close the window, and they stay intact.

When I connect the laptop to a running megasquirt I am unable to burn changes except the very first time that I connect. This applies to any table that isn't 3d. If I make the table 3d it DOES change/burn.

Here is video:
Image
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

Yes, this is an issue discovered earlier today.

It occurs after a difference report is received. All tables to not actually update.

I am putting together a patch release right now. It will be up within the hour..
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

3.0.14 is released with a fix for this.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Chiburbian
Helpful MS/Extra'er
Posts: 108
Joined: Mon Aug 08, 2011 11:03 am

Re: Unable to modify VE or ignition table

Post by Chiburbian »

Thank you!
Top
Blown88GT
Super MS/Extra'er
Posts: 931
Joined: Sun Dec 15, 2013 7:53 pm
Location: South Florida

Re: Unable to modify VE or ignition table

Post by Blown88GT »

If not connected, do you have to hit "Burn" for it to save?
I think I've seen it work one way or the other in different versions.
Didn't pay much attention until I read this thread.
1988 Mustang GT, 59k miles, Orig Owner
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
Top
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

Re: Unable to modify VE or ignition table

Post by Yves »

I have the following issue after the latest update : I cannot change anything in the VE table, ignition table, trim tables,....Only when doing it offline, it is accepted by the ecu...
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

Yves wrote:I have the following issue after the latest update : I cannot change anything in the VE table, ignition table, trim tables,....Only when doing it offline, it is accepted by the ecu...
Please read above your post...
I'm guessing when you said "Latest Update" you are not on 3.0.14.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

Re: Unable to modify VE or ignition table

Post by Yves »

yes I am. VE and ignition problem cleared up with that update but not the fuel trim for instance. Haven't tried the rest.
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

Yves wrote:yes I am. VE and ignition problem cleared up with that update but not the fuel trim for instance. Haven't tried the rest.
I will need more info, I can not seem to reproduce this on 3.0.14. Fuel trim seems to be working fine.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

Re: Unable to modify VE or ignition table

Post by Yves »

what info ?
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

A specific scenario to reproduce this in 3.0.14
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

Re: Unable to modify VE or ignition table

Post by Yves »

running engine, didn't want to accept changes to trim table
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

Try before you post it...
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

Re: Unable to modify VE or ignition table

Post by Yves »

Are you bullshitting me man ? Maybe you should think first before you accuse :evil:
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: Unable to modify VE or ignition table

Post by LT401Vette »

I give up.....
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
Post Reply

Return to “Tuner Studio”